Skip to content
PowerShell Commands

Invoke-WmiMethod

Invoke-WmiMethod [-Class*] <String> [-Name*] <String> [-ArgumentList <Object[]>] [-AsJob] [-Authentication {Default| None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <String>][-ComputerName <String[]>] [-Confirm] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default| Anonymous | Identify | Impersonate | Delegate}] [-Locale <String>] [-Namespace <String>] [-ThrottleLimit<Int32>] [-WhatIf] [<CommonParameters>]
Invoke-WmiMethod [-Name*] <String> [-ArgumentList <Object[]>] [-AsJob] [-Confirm] -InputObject* <ManagementObject>[-ThrottleLimit <Int32>] [-WhatIf] [<CommonParameters>]
Invoke-WmiMethod [-Name*] <String> [-ArgumentList <Object[]>] [-AsJob] [-Authentication {Default | None | Connect |Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <String>] [-ComputerName <String[]>][-Confirm] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify |Impersonate | Delegate}] [-Locale <String>] [-Namespace <String>] -Path* <String> [-ThrottleLimit <Int32>][-WhatIf] [<CommonParameters>]
Invoke-WmiMethod [-Name*] <String> [-AsJob] [-Authentication {Default | None | Connect | Call | Packet |PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <String>] [-ComputerName <String[]>] [-Confirm][-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate| Delegate}] [-Locale <String>] [-Namespace <String>] [-ThrottleLimit <Int32>] [-WhatIf] [<CommonParameters>]
Invoke-WmiMethod [-Name*] <String> [-AsJob] [-Authentication {Default | None | Connect | Call | Packet |PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <String>] [-ComputerName <String[]>] [-Confirm][-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate| Delegate}] [-Locale <String>] [-Namespace <String>] [-ThrottleLimit <Int32>] [-WhatIf] [<CommonParameters>]
Invoke-WmiMethod [-Name*] <String> [-AsJob] [-Authentication {Default | None | Connect | Call | Packet |PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <String>] [-ComputerName <String[]>] [-Confirm][-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate| Delegate}] [-Locale <String>] [-Namespace <String>] [-ThrottleLimit <Int32>] [-WhatIf] [<CommonParameters>]

The Invoke-WmiMethod cmdlet calls the methods of Windows Management Instrumentation (WMI) objects.

New Common Information Model (CIM) cmdlets, introduced in Windows PowerShell 3.0, perform the same tasks as the WMI cmdlets. The CIM cmdlets comply with WS-Management (WSMan) standards and with the CIM standard, which enables the cmdlets to use the same techniques to manage Windows computers and those running other operating systems. Instead of using Invoke-WmiMethod , consider using Invoke-CimMethodhttp://go.microsoft.com/fwlink/?LinkId=227965.

Parameters

-ArgumentList <Object[]>

  • Default value is None
  • Accepts pipeline input False

Specifies the parameters to pass to the called method. The value of this parameter must be an array of objects, and they must appear in the order required by the called method. The Invoke-CimCommand cmdlet does not have these limitations.

To determine the order in which to list those objects, run the GetMethodParameters() method on the WMI class, as illustrated in Example 1, near the end of this topic.

Important: If the first value is an array that contains more than one element, a second value of $null is required. Otherwise, the command generates an error, such as "Unable to cast object of type 'System.Byte' to type 'System.Array'.".

An example using an array of objects ($binSD) followed by a null value ($null) follows:

PS C:\>$acl = get-acl test.txt

PS C:\>$binSD = $acl.GetSecurityDescriptorBinaryForm()

PS C:\>invoke-wmimethod -class Win32_SecurityDescriptorHelper -Name BinarySDToSDDL -argumentlist $binSD, $null

-AsJob [<SwitchParameter>]

  • Default value is False
  • Accepts pipeline input False

Indicates that this cmdlet runs the command as a background job. Use this parameter to run commands that take a long time to finish.

When you use the AsJob parameter, the command returns an object that represents the background job and then displays the command prompt. You can continue to work in the session while the job finishes. If Invoke-WmiMethod is used against a remote computer, the job is created on the local computer, and the results from remote computers are automatically returned to the local computer. To manage the job, use the cmdlets that contain the Job noun (the Job cmdlets). To get the job results, use the Receive-Job cmdlet.

To use this parameter with remote computers, the local and remote computers must be configured for remoting. Additionally, you must start Windows PowerShell by using the Run as administrator option in Windows Vista and later versions of Windows.

-Authentication <AuthenticationLevel>

  • Default value is None
  • Accepts pipeline input False

Specifies the authentication level to be used with the WMI connection. The acceptable values for this parameter are:

-1: Unchanged

0: Default

1: None (No authentication in performed.)

2: Connect (Authentication is performed only when the client establishes a relationship with the application.)

3: Call (Authentication is performed only at the beginning of each call when the application receives the request.)

4: Packet (Authentication is performed on all the data that is received from the client.)

5: PacketIntegrity (All the data that is transferred between the client and the application is authenticated and verified.)

6: PacketPrivacy (The properties of the other authentication levels are used, and all the data is encrypted.)

-Authority <String>

  • Default value is None
  • Accepts pipeline input False

Specifies the authority to use to authenticate the WMI connection. You can specify standard Windows NT LAN Manager (NTLM) or Kerberos authentication. To use NTLM, set the authority setting to ntlmdomain:<DomainName>, where <DomainName> identifies a valid NTLM domain name. To use Kerberos, specify kerberos:<DomainName\ServerName>. You cannot include the authority setting when you connect to the local computer.

-Class <String>

  • This value is required
  • Default value is None
  • Accepts pipeline input False

Specifies the WMI class that contains a static method to call.

-ComputerName <String[]>

  • Default value is None
  • Accepts pipeline input False

Specifies, as a string array, the computers that this cmdlet runs the command on. The default is the local computer.

Type the NetBIOS name, an IP address, or a fully qualified domain name of one or more computers. To specify the local computer, type the computer name, a dot (.), or localhost.

This parameter does not rely on Windows PowerShell remoting. You can use the ComputerName parameter even if your computer is not configured to run remote commands.

-Confirm [<SwitchParameter>]

  • Default value is False
  • Accepts pipeline input False

Prompts you for confirmation before running the cmdlet.

-Credential <PSCredential>

  • Default value is None
  • Accepts pipeline input False

Specifies a user account that has permission to perform this action. The default is the current user. Type a user name, such as User01, Domain01\User01, or [email protected]. Or, enter a PSCredential object, such as an object that is returned by the Get-Credential cmdlet. When you type a user name, you will be prompted for a password.

-EnableAllPrivileges [<SwitchParameter>]

  • Default value is False
  • Accepts pipeline input False

Indicates that this cmdlet enables all the privileges of the current user before the command makes the WMI call.

-Impersonation <ImpersonationLevel>

  • Default value is None
  • Accepts pipeline input False

Specifies the impersonation level to use. The acceptable values for this parameter are:

0: Default (Reads the local registry for the default impersonation level, which is usually set to "3: Impersonate".)

1: Anonymous (Hides the credentials of the caller.)

2: Identify (Allows objects to query the credentials of the caller.)

3: Impersonate (Allows objects to use the credentials of the caller.)

4: Delegate (Allows objects to permit other objects to use the credentials of the caller.)

-InputObject <ManagementObject>

  • This value is required
  • Default value is None
  • Accepts pipeline input ByValue

Specifies a ManagementObject object to use as input. When this parameter is used, all other parameters except the Flag and Argument parameters are ignored.

-Locale <String>

  • Default value is None
  • Accepts pipeline input False

Specifies the preferred locale for WMI objects. Specify the value of the Locale parameter as an array in the MS_<LCID> format in the preferred order.

-Name <String>

  • This value is required
  • Default value is None
  • Accepts pipeline input False

Specifies the name of the method to be invoked. This parameter is mandatory and cannot be null or empty.

-Namespace <String>

  • Default value is None
  • Accepts pipeline input False

When used with the Class parameter, this parameter specifies the WMI repository namespace where the referenced WMI class or object is located.

-Path <String>

  • This value is required
  • Default value is None
  • Accepts pipeline input False

Specifies the WMI object path of a WMI class, or specifies the WMI object path of an instance of a WMI class. The class or the instance that you specify must contain the method that is specified in the Name parameter.

-ThrottleLimit <Int32>

  • Default value is None
  • Accepts pipeline input False

Specifies a throttle value for the number of WMI operations that can be executed simultaneously. This parameter is used together with the AsJob parameter. The throttle limit applies only to the current command, not to the session or to the computer.

-WhatIf [<SwitchParameter>]

  • Default value is False
  • Accepts pipeline input False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

<CommonParameters>

This cmdlet supports the common parameters: Verbose, Debug,ErrorAction, ErrorVariable, WarningAction, WarningVariable,OutBuffer, PipelineVariable, and OutVariable.

Inputs
None
This cmdlet does not accept any input.
Outputs
None
This cmdlet does not generate any output.
Examples
  1. List the required order of WMI objects:
    PS C:\> ([wmiclass]'Win32_Volume').GetMethodParameters('Format')
    __GENUS           : 2
    __CLASS           : __PARAMETERS
    __SUPERCLASS      :
    __DYNASTY         : __PARAMETERS
    __RELPATH         :
    __PROPERTY_COUNT  : 6
    __DERIVATION      : {}
    __SERVER          :
    __NAMESPACE       :
    __PATH            :
    ClusterSize       : 0
    EnableCompression : False
    FileSystem        : NTFS
    Label             :
    QuickFormat       : False
    Version           : 0
    PSComputerName    :
    

    This command lists the required order of the objects. To invoke WMI in PowerShell 3.0 differs from alternate methods, and requires that object values are entered in a specific order.

  2. Start an instance of an application:
    PS C:\> ([Wmiclass]'Win32_Process').GetMethodParameters('Create')
    __GENUS                   : 2
    __CLASS                   : __PARAMETERS
    __SUPERCLASS              : __DYNASTY                 : __PARAMETERS
    __RELPATH                 : __PROPERTY_COUNT          : 3
    __DERIVATION              : {}
    __SERVER                  : __NAMESPACE               : __PATH                    : CommandLine               : CurrentDirectory          : ProcessStartupInformation : PSComputerName            : PS C:\> Invoke-WmiMethod -Path win32_process -Name create -ArgumentList notepad.exe
    __GENUS          : 2
    __CLASS          : __PARAMETERS
    __SUPERCLASS     : __DYNASTY        : __PARAMETERS
    __RELPATH        : __PROPERTY_COUNT : 2
    __DERIVATION     : {}
    __SERVER         : __NAMESPACE      : __PATH           : ProcessId        : 11312
    ReturnValue      : 0
    PSComputerName   :
    

    This command starts an instance of Notepad by calling the Create method of the Win32_Process class.

    The ReturnValue property is populated with a 0, and the ProcessId property is populated with an integer (the next process ID number) if the command is completed.

  3. Rename a file:
    PS C:\> Invoke-WmiMethod -Path "CIM_DataFile.Name='C:\scripts\test.txt'" -Name Rename -ArgumentList "C:\scripts\test_bu.txt"
    __GENUS          : 2
    __CLASS          : __PARAMETERS
    __SUPERCLASS     : __DYNASTY        : __PARAMETERS
    __RELPATH        : __PROPERTY_COUNT : 1
    __DERIVATION     : {}
    __SERVER         : __NAMESPACE      : __PATH           : ReturnValue      : 0
    

    This command renames a file. It uses the Path parameter to reference an instance of the CIM_DataFile class. Then, it applies the Rename method to that particular instance.

    The ReturnValue property is populated with a 0 if the command is completed.

Additional Notes

This work is licensed under a Creative Commons Attribution 4.0 International. It is attributed to Microsoft Corporation and can be found here.

PowerShell Commands